We pursue the administration tenet of “Quality is top-quality, Services is supreme, Popularity is first”, and will sincerely create and share success with all clients for Manufacturing Companies for TW-4040 XLE RO Membrane Element for RO System, We are not satisfied with the present achievements but we are trying best to innovate to meet buyer’s more personalized needs. No matter where you are from, we are here to wait for your kind request and welcome to visit our factory. Choose us, you can meet your reliable supplier.
We pursue the administration tenet of “Quality is top-quality, Services is supreme, Popularity is first”, and will sincerely create and share success with all clients for 4040 xle. We all highly imagine that now we have the full capacity to existing you with contented merchandise. Desire to collect requests of your stuff and produce the long-term co-operation partnership. We very seriously promise Csame top quality, better price; exact same selling price, higher quality.

4040 xle

Being one of the earliest RO membranes manufacturers in China, HID^TM ranks the best brands among the Chinese RO membrane industry. Each RO membrane is made of HID TM high rejection flat sheet and goes through most stringent manufacturing processes as well as in-house quality inspection & testing till delivery. 4040 series RO membranes are widely used for filtration of tap water, underground water & brackish water; we well serve the industries including commercial drinking/food water treatment, electronics & chemical works, power plants, etc.

- HID^TM anti-fouling & high rejection flat sheet (film);
- lower energy costs (low pressure models) and higher productivity;
- highly stabilized rejection with realized nominal flux;
- minimize system CAPEX with HID^TM RO membrane excellent performance-price ratio;
- stringent in-house inspection & testing control.

1. Permeate flow rate and salt rejection is based on testing conditions: 25℃, PH 7.5, 20% recovery.
2. Stabilized salt rejection is generally achieved within 24-48 hours of continuous use, depending upon feedwater characteristics and operating conditions.

To ensure proper startup of RO water treatment systems is essential to prepare the membranes for operating service and to prevent membrane damage due to overfeeding or hydraulic shock.
To follow the proper startup procedure (available with water treatment system guide book) also helps ensure that system operating parameters conform to design specifications so that system water quality and productivity goals can be achieved.
Before initiating system startup procedures, membrane pretreatment, loading of the membrane elements, instrument calibration and other system checks should be completed.

It is CRITICAL to avoid any abrupt pressure or cross-flow variations on the RO membrane elements during start-up, shutdown, cleaning or other sequences to prevent possible membrane damage. During startup, a gradual change from a standstill to operating state is recommended as follows:
• Feed pressure should be increased gradually over a 30-90 second time frame.
• Cross-flow velocity at set operating point should be achieved gradually over 15-30 seconds.
• Permeate obtained from the first hour of operation should be discarded.

Keep RO membrane elements moist at all times after initial wetting.
If operating limits and guidelines given in this specification are not strictly followed, the limited warranty with the supplier will be null and void.
To prevent biological growth during prolonged system shutdowns, it is recommended that RO membrane elements be immersed in a storage solution.
The customer is fully responsible for the effects of incompatible chemicals and lubricants on elements.
The maximum pressure drop across an entire pressure vessel (housing) is 50 psi (3.4 bar).
Avoid static permeate-side backpressure at all times.